Just got back from Publix's incubator and hatchery. You may not have known they were in the business. They may not know it either.
But, they are. Out front of the store, high off the sidewalk, and back under the cover of the built-in brick awning, is the big, internally lighted sign announcing Publix. I've walked past there for years, and I've made mental notes of the birds chirping from above, and more than once thought about the fact that they were building nests in the sign.
Today, I stopped and looked up, instead of hurrying by. I could see the straw hanging from every nook and cranny, and many parent birds hopping around, probably turning eggs or trying to feed chicks. Near the entry to the store was a propane tank cage, about five feet cubed, and on top, I saw the carcass of a small chick that had fallen from its nest. It didn't survive, of course.
Back when I was still in the business, I got many calls from frustrated growers, wondering why their chicks didn't hatch, and if they did, why they didn't survive. Most of them just wanted some hint of an idea of what may have gone wrong, and while there are many things that affect hatches, the biggest problem, according to research at a leading NC university, is humidity...mostly high humidity.
As I stood there watching the birds flutter about, I decided to come home and write this little post. I almost always had test hatches running at work. Mostly I would be testing a new turner design, a new fan, a new heat element, and often just different humidity settings. I did find, that if I were to err, I would want to do it to the low side. I found temperature could vary a bit without great loss. Hatch day would change, but I'd still get an acceptable hatch rate.
I remember running some test in one of the small tabletop incubators, and I got everything set up so I wouldn't have to come in over the weekend. I don't remember what I was testing, but Monday morning when I got to work and checked the incubator, I found I had left it unplugged. Turner, too.
Well, I still got better than a 50% hatch. That was 48 hours with no turning, and a temperature of about 70 degrees once the incubator cooled down to room temp. Needless to say I was a bit annoyed at myself, because even though there was a hatch, whatever test I had been running had to be started again. But what the hey...what's three more weeks, right?
While I'm on the subject, (this will always be the subject, as a matter of fact) cleanliness comes to mind. We always promote a clean operation. And, I'm sure you do, too. But, I had some interesting calls in that area. I remember one in particular.
It was during the ostrich/emu craze, when everyone was trying to get ahead of the pack. They always hatch with very low humidity and the customer was looking for ways to get his lower. But, that was only part of the reason he called. His neighbor across the street was hatching the same eggs. Trouble is, the neighbor was getting much better hatches. And, it wasn't so much the fact his hatches were better, as it was the competition's methodology.
It seems my caller tried to do everything by the book, even wearing cotton gloves when handling his eggs...just to avoid the oily fingerprints getting on the shell. According to him, his neighbor was dirty, didn't clean his incubators or hatchers, and in general, didn't pay a lot of attention to much of anything. Yet, he got apparently good hatches. But I imagine it's rare. We still maintain a clean operation is a better operation. But, if you're going to miss the humidity level, miss to the low side.
Good hatches to you.
Thursday, June 18, 2009
Tuesday, June 16, 2009
Old wive's tales
I can't remember all the "old wives tales" that were used to tell different things in the hatching and incubating business. Most of them had to do with how to determine the fertility of eggs and/or the sex of the eggs.
One of the most popular tales, was how to tell if the eggs were fertile. You simply placed the eggs in a bucket of water, and the eggs either floated, or they didn't. Trouble is, I don't remember which were supposed to be fertile, the floaters, or the sinkers. Oh, well. It didn't work anyway, so it doesn't really matter. The only way I ever found to determine the fertility of the egg, was to candle it after a few days of incubating. 100% accurate.
There were also those old timers who had ways of determining the sex of the chick before the eggs hatched, but I'm not able to remember even one technique right now. Maybe, if anyone out there knows some, they can post to the site. I never heard one that worked, of course, at least not for us. Again, the only way we had, was to wait a few days or weeks after the hatch, and then do it by the coloring. That was about 90% accurate. I'll take a look around the web, and see if I can come up with anything. If so, I'll post it back here, too.
Another thing we heard often, regarding fertility, was the weight theory. The theory was the egg didn't have to be candled because if it were fertile and developing, it would get heavier as the hatch progressed. Wrong, again. Eggs actually lose weight during the hatching process, whether they're fertile or not. They can lose as much as fifteen percent, so there goes that system.
But, they're all fun to think and talk about. And, maybe, once in a while, they might even work!;~))
Good hatches, all.
One of the most popular tales, was how to tell if the eggs were fertile. You simply placed the eggs in a bucket of water, and the eggs either floated, or they didn't. Trouble is, I don't remember which were supposed to be fertile, the floaters, or the sinkers. Oh, well. It didn't work anyway, so it doesn't really matter. The only way I ever found to determine the fertility of the egg, was to candle it after a few days of incubating. 100% accurate.
There were also those old timers who had ways of determining the sex of the chick before the eggs hatched, but I'm not able to remember even one technique right now. Maybe, if anyone out there knows some, they can post to the site. I never heard one that worked, of course, at least not for us. Again, the only way we had, was to wait a few days or weeks after the hatch, and then do it by the coloring. That was about 90% accurate. I'll take a look around the web, and see if I can come up with anything. If so, I'll post it back here, too.
Another thing we heard often, regarding fertility, was the weight theory. The theory was the egg didn't have to be candled because if it were fertile and developing, it would get heavier as the hatch progressed. Wrong, again. Eggs actually lose weight during the hatching process, whether they're fertile or not. They can lose as much as fifteen percent, so there goes that system.
But, they're all fun to think and talk about. And, maybe, once in a while, they might even work!;~))
Good hatches, all.
Saturday, June 6, 2009
Day One
Day one in the life of this blog. I've been thinking about doing this for a year or more, and it seems about time to get it in the works. I hope some of you find it, and maybe there will even be some who remember me from my days in the business.
I was about to say I missed the business, but what I think I've missed, is the customers I was able to help with their various incubator problems. So, if you've found this blog, and you have some problem with your birds or incubators, or you just want to chat, this is a place to do it.
When I first started thinking about this, I did do a little book on incubating, brooding and raising birds...as a hobby, or small business. Unfortunately, I lost everything in a crash, without proper backups. I now use an offsite backup. That was, to say the least, heart breaking. I'm just getting started on the second version of my book.
I tend to work better with a problem or question, so if you have one, let me have a go at it. I was in the business for almost 25 years, working with one of the, if not the major, suppliers to the industry.
I will be posting photos, and if you have some you want to share, I hope that's something that this blog will accommodate.
Good Hatches,
I was about to say I missed the business, but what I think I've missed, is the customers I was able to help with their various incubator problems. So, if you've found this blog, and you have some problem with your birds or incubators, or you just want to chat, this is a place to do it.
When I first started thinking about this, I did do a little book on incubating, brooding and raising birds...as a hobby, or small business. Unfortunately, I lost everything in a crash, without proper backups. I now use an offsite backup. That was, to say the least, heart breaking. I'm just getting started on the second version of my book.
I tend to work better with a problem or question, so if you have one, let me have a go at it. I was in the business for almost 25 years, working with one of the, if not the major, suppliers to the industry.
I will be posting photos, and if you have some you want to share, I hope that's something that this blog will accommodate.
Good Hatches,
Subscribe to:
Posts (Atom)
